Reach-In Evaporators

  • Model TA Thin profile air defrost unit coolers
  • 1,000 thru 5,500 BTUH Model TL Thin profile
    electric defrost unit coolers 900 thru 5,300 BTUH
  • Model C High profile air defrost unit coolers
    1,300 thru 4,300 BTUH
  • Model VA V-Profile air defrost unit coolers 600
    thru 1,700 BTUH
  • Model BB Back bar unit coolers 1,000 thru
    1,600 BTUH
  • Model KMK Standard mullion unit coolers 1,300
    thru 2,300 BTUH
  • Model RAMK Reverse air mullion unit coolers
    1,300 thru 2,300 BTUH
  • Model BTO Twin flow unit coolers 900 thru
    5,500 BTUH
  • Model U Dual air unit coolers 850 thru
    1,500 BTUH
  • Model TA Thin profile air defrost unit coolers
  • 1,000 thru 5,500 BTUH Model TL Thin profile
    electric defrost unit coolers 900 thru 5,300 BTUH
  • Model C High profile air defrost unit coolers
    1,300 thru 4,300 BTUH
  • Model VA V-Profile air defrost unit coolers
    600 thru 1,700 BTUH
  • Model BB Back bar unit coolers 1,000 thru
    1,600 BTUH
  • Model KMK Standard mullion unit coolers
    1,300 thru 2,300 BTUH
  • Model RAMK Reverse air mullion unit coolers
    1,300 thru 2,300 BTUH
  • Model BTO Twin flow unit coolers 900 thru
    5,500 BTUH
  • Model U Dual air unit coolers 850 thru 1,500 BTUH

Walk-In Evaporators Low Profile Air,
Electric and Hot Gas Defrost unit Coolers

Model LCA features:

  • Air Defrost with shaded pole motors
  • More capacities 5,700, 7,000 and
    35,000 BTUH models.
  • More Accessible:
  • Electrical and piping on opposite ends.
  • Access provided trough large access panels.
  • Schrader valve on suction header.
  • Extended Warranty for coil construction:
  • 3 years protection against tube sheet leaks.
  • Drain Fitting allows removal of drain pan
    without removal of hard piping.
  • Molded Fan Guard design made of strong plastic
    material or optional wire fan guard for air diffusion.
  • Internally enhanced tubing.


Model LCE (electric defrost)
and LCH (hot gas defrost)

Additional Features for Electric and
Hot Gas Defrost Models:

More Accessible:

  • Defrost heaters on entering air face of the coil.
  • Hot gas loop on bottom of coil, not in drain pan.
  • Drain pan heater on bottom for coil,
    nit in drain pan.
  • Fixed defrost termination/fan delay.
  • Reduced heater Wattage.

Low Velocity Air, Electric and Hot Gas Defrost unit Coolers Model LFA features very low coil face velocity yet provides positive, quiet air movement. This combination assures even box temperatures and high humidity at the same time. LFA unit coolers equal or outperform gravity coils but are far more economical to install. Their low, narrow construction was designed especially for installation between the rail beams in meat storage and aging rooms. The high humidity characteristics minimize shrinkage, and dehydration of produce. Model LFA has been designed for the attractive appearance and easy cleaning necessary in food processing.

Low Air Flow Air, Electric and Hot Gas Defrost unit Coolers Model LW low air flow evaporators is ideal for floral storage, fresh fruit and vegetables, dough retarding, fresh meat storage and preparations, and many other applications of 35¡F. and above for LWA air defrost models, 25¡F and above for LWE electric / LWG hot gas models. The low air flow and quiet fans are ideal for work room applications. The generous coil surface combined with close T.D. system balance provides high humidity characteristics to minimize product shrinkage and drying.

Center Mount Air, Electric and Hot Gas Defrost unit Coolers Model CM units are compact, medium velocity coolers designed for use in 35¡F. and above for ACW air defrost models,

-20¡F to +34¡F for ECW electric / GCW hot gas models. The low height gives more head room and allows product to be stacked higher. The center ceiling mount with dual air flow allows shelving and storage of product around all walls.

Medium Profile Air, Electric and Hot Gas Defrost unit Coolers Larkin engineered superior quality and performance into the new medium profile unit coolers. With features like the innovative Thermo-Flex tm coil design that carries a five year limited guarantee against refrigerant leaks, internal grooved tubing for greater heat transfer efficiency and motors that plug into the wiring harness for easier accessibility, these units provide long life and dependability to your refrigeration application.

With 10,000 to 71,000 BTHU size ranges and a modular design that is only 25 inches high, these unit coolers serve a variety of commercial and industrial applications.

Warehouse/Industrial Evaporators Warehouse/Industrial Air, Electric and Hot Gas Defrost unit Coolers Model LH

is ideal for warehouse cooler/freezer applications.
With a wide capacity range and the patented
Thermo-Flex
tm
coil design, these large unit coolers
provide efficient, reliable operation. Features finish,
850 RPM motors for low noise and reliability, liquid
line solenoid wiring harness for faster installation,
suction Schrader fitting for easier suction temperature measurement. Also, the large unit coolers no fumbling
with loose bolts and nuts. The LH Series also has
a standardized terminal broad for easier field wiring.

 

Ripening Room Evaporators

Model LPR Thin ripening room unit coolers 7,800 thru 15,600CFM

Beacon II¨ Refrigeration System

Beacon II id the next generation of Larkin's patented pre-assembled, factory installed refrigeration system featuring an integrated microcomputer-based electronic control board.

Smart Controllertm

Smart Defrost

Smart Software

Condensing Units

  • 1/2 thru 5 Hp Indoor or Outdoor condensing
    units with semi-hermetic compressors
  • 1/2 thru 5 Hp Indoor or Outdoor condensing
    units with hermetic compressors
  • 2 thru 6 Hp Indoor or Outdoor condensing
    units with scroll compressors
  • 3 thru 15 Hp Indoor or Outdoor condensing
    units with discus or scroll compressors
  • 12 thru 40 Hp Outdoor condensing units
  • 24 thru 80 Hp Outdoor condensing units
    with dual compressors
  • 1/2 thru 6 Hp Remote water cooled condensing
    units with hermetic or scroll compressors
  • 3/4 thru 22 Hp Indoor water cooled
    condensing units
  • 3/4 thru 22 Hp Indoor remote compressor
    condensing units
  • 3/4 thru 30 Hp Indoor/Supermarket condensing
    units
  • 3/4 thru 30 Hp Indoor/Supermarket condensing
    units with discus compressors
  • 1/4 thru 5 Hp Hermetic indoor condensing units,
    Refrigerants R-22, R-134a, and R-404a/507

 

Air Cooled Condensers

1 thru 212 Tons Direct drive air cooled condensers

 

 

 

 

 

 





 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   
     
  Copyright ©2003 Universal Equipment Suppliers, Inc., All Rights Reserved.